What Size Horizontal Machining Center Do I Need?

Selection of main specifications (1) Table size This is the main parameter of the horizontal machining center, which mainly depends on the outline size and clamping method of typical parts. A table that is slightly larger than the typical part outline size should be selected to allow the space required to install the fixture and ensure that the part can be clamped smoothly on it. In addition, the bearing capacity of the table, the number of T-slots and the Size, etc., the small size is more general, such as the horizontal machining center MH-630A, MH-800A, MH-500A, LH-630B, etc. in the station. (2) The most basic coordinate axes of coordinate axis travel are X, Y, and Z axes, and their travel and the size of the worktable have a corresponding proportional relationship. The size of the worktable basically determines the size of the processing space. If the size of individual parts is larger than the stroke of the horizontal machining center, the processing area of the parts must be within the stroke range of the machine tool, and it is also necessary to consider whether the parts interfere with the space of the machine tool exchange tool, and the machine tool protective cover and other accessories. and other series of questions. For horizontal machining centers that require multi-axis linkage processing (such as adding rotary coordinates A, B, C or additional coordinates U, V, W), such as four-axis and five-axis linkage horizontal machining centers, special orders are required. At the same time, there must be a comprehensive consideration and arrangement for the corresponding programming software, measurement methods and machine tool prices.