The Function Of Horizontal Machining Center And The Adaptability Of Machining

Although the machining center can perform various processes such as drilling, expanding, milling, boring, reaming, tapping and even turning (such as turning-milling machining center), the function and processing of the machine tool should also be considered according to specific needs when making a specific selection. compatibility, etc. The following points should be paid attention to: A. When processing complex curves, it is necessary to consider whether the CNC has the required curve interpolation function, or what method to choose to approximate the processing curve and ensure the required surface roughness. When 3D machining, it is necessary to consider the selection of the appropriate tool structure and the programming ability. If necessary, it must be equipped with an automatic programming device or a post-processing programming device. B. When thread cutting (non-tapping thread mode) is required, it is necessary to consider not only whether there is a thread cutting function, a helical interpolation function and a spindle rotation and feed synchronization function, but also whether the machine tool has a radial feed device and whether It has the function of accurate positioning of the spindle at any angle in the rotation direction. Otherwise, the thread cutting cannot be performed only by using the thread cutting function in the CNC system. C. When using special processing such as diamond reaming, floating boring and extrusion processing, it is necessary to consider not only the conditions for suitable automatic tool change, but also the selection of suitable tool structure and cutting amount, which should be purchased together as much as possible when purchasing the host. Some wearing parts and other accessories, etc. D. If there is a plan to apply DNC, FMS, CIMS, etc., or network manufacturing is to be carried out, attention should be paid to the communication function, and a system with interfaces such as RS-232, RS-485, or even MAP network communication and CAN bus should be selected. .